Model |
Free Speed rpm |
Collect Capacity mm & inch |
M. Burr size mm |
Wheel size mm |
Approx Weight kgs. | Total Length mm | Outside mm | Air Inlet R/C |
DG-1-8 |
8000 |
6 or1/4" |
32x25 |
76x20 |
2.00 | 317 | 51 | 3/8" |
DG-1A-8 |
8000 |
6 or1/4" |
32x25 |
76x20 |
1.80 | 235 | 51 | 3/8" |
DG-1-12 |
12000 |
6 or1/4" |
32x25 |
76x20 |
2.00 | 317 | 51 | 3/8" |
DG-1A-12 |
12000 |
6 or1/4" |
32x25 |
76x20 |
1.80 | 235 | 51 | 3/8" |
DG-1-15 |
15000 |
6 or1/4" |
32x25 |
56x20 |
2.00 | 317 | 51 | 3/8" |
DG-1A-15 |
15000 |
6 or1/4" |
32x25 |
56x20 |
1.80 | 235 | 51 | 3/8" |
DG-1-18 |
18000 |
6 or1/4" |
32x25 |
50x20 |
2.00 | 317 | 51 | 3/8" |
| DG-1A-18 | 18000 | 6 or1/4" | 32x25 | 50x20 | 1.80 | 235 | 51 | 3/8" |
| DG-1-21 | 21000 | 6 or1/4" | 32x25 | 40x20 | 2.00 | 317 | 51 | 3/8" |
| DG-1A-21 | 21000 | 6 or1/4" | 32x25 | 40x20 | 1.80 | 235 | 51 | 3/8" |
| Option of Collect or wheel Guard on above models only. New Series |
||||||||
| DG-FP-17 | 17000 | 6 or 1/4" | 32x25 | 50x20 | 1.20 | 383 | 40 | 1/4" |
| DG-FT-17 | 17000 | 6 or 1/4" | 32x25 | 50x20 | 1.20 | 383 | 40 | 1/4" |
| DG-FP-19 | 19000 | 6 or 1/4" | 32x25 | 50x20 | 1.10 | 268 | 40 | 1/4" |
| DG-FT-19 | 19000 | 6 or 1/4" | 32x25 | 50x20 | 1.10 | 268 | 40 | 1/4" |
| DG-FPA-19 | 19000 | 6 or 1/4" | 32x25 | 50x20 | 0.90 | 188 | 40 | 1/4" |
| DG-FTA-19 | 19000 | 6 or 1/4" | 32x25 | 50x20 | 0.90 | 188 | 40 | 1/4" |
Pencil
/ Hand Grinders
Air
Motors
Die
Grinders
Angle
Grinders/Sanders
Heavy
Duty Grinders
Drills
Impact
Wrenches
Screw
Drivers
Chipping hammers
Weld
Flux Chippers
/Needle
Scalers
Bench
& Floor Rammers
Riveting Hammers
Rivet Busters
PNEU TECH ENGINEERING
Post
Box No. 7772, Unit 17, Ashok Industrial Estate, Lal Bahadur Shastri Marg,
Mulund (W), Mumbai 400 080, INDIA
Tel: 91-2-568 5697/565 3907. Fax: 91-22-564 6802.
pneutech@bom3.vsnl.net.in